作业帮英语翻译32.10 Transverse radius rodsWhere coil,torsion bar or air springs are used,which of course cannot locate the axle,other measures have to be introduced.Two such arrangements are illustrated in Figs 32.8 and 32.9,where transverse radius rod
来源：学生作业帮助网 编辑：作业帮 时间：2024/04/30 11:17:19
英语翻译32.10 Transverse radius rodsWhere coil,torsion bar or air springs are used,which of course cannot locate the axle,other measures have to be introduced.Two such arrangements are illustrated in Figs 32.8 and 32.9,where transverse radius rod
英语翻译
32.10 Transverse radius rods
Where coil,torsion bar or air springs are used,which of course cannot locate the axle,other measures have to be introduced.Two such arrangements are illustrated in Figs 32.8 and 32.9,where transverse radius rods A,usually termed Panhard rods,are employed - to take the lateral loads - in conjunction with a single combined torque-thrust member B of the type illustrated in Fig.32.6.With the arrangement of Fig.31.8,the Panhard rod is parallel to the axle and therefore can have simple pivots at its ends.The advantage in Fig.32.9 is that the Panhard rod is longer and therefore has less tendency to pull the axle laterally,as it moves up and down.On the other hand,its pivots must be rubber bushed,unless it can be arranged to lie parallel to the axle.
英语翻译32.10 Transverse radius rodsWhere coil,torsion bar or air springs are used,which of course cannot locate the axle,other measures have to be introduced.Two such arrangements are illustrated in Figs 32.8 and 32.9,where transverse radius rod
32.10杆横向半径
在线圈、扭杆或空气弹簧使用的地方,这当然无法放置车桥,其他措施必须加入.在图32.9 32.8阐述了两种这样的安排,横向半径杆A,通常称为安棒、可承受侧向力,联同一个单一的联合扭转推力B（图说明326）.如图31.8,安棒平行轴,因此就会有简单的枢纽的结构形式.在图32.9的优势是杆长度可变,因此减少了轴向拉的上下移动.另一方面,它必须为橡胶定位,除非你能安排平行车桥.